How to Use Carburetor Cleaner for Easy Car Maintenance?

May 30, 2024

Model NO.: LBS-001
Capacity: 250 - 450ml
Brand: LAMBOSS
Validity: Three Years
Trademark: LAMBOSS
Specification: CE, RoHS, SGS, GMP

Type: Car Care Spray
Volume: 450ml
Package: 12PCS/CTN
Transport Package: 12PCS/CTN
Origin: Guangdong, China

LAMBOSS Choke & Carb Cleaner is designed to provide a high delivery and fast cleaning action. It can be used through the carburetor when the engine is running. It penetrates quickly to loosen and clean away varnish, oil, gum, etc. on automatic chokes, carburetors, manifolds, heat controls and positive crankcase ventilation valves.

Features
Unique through-the-engine formula can be used while the car is running
Can be used on cold, warm and running engines
Oxygen sensor safe
Low-odour, fast-drying, high-delivery rate with quick cleaning action
Excellent solvency will attack painted surface (avoid spraying on painted area)

Applications
Carburetors
Choke & Linkage Assemblies
PCV Valves
Oil pans & transmission

Directions For Use
To remove deposits such as varnishes, oils, gum & other residues
Shake the can well
Hold can upright and push actuator all the way down to apply uniform spray
If using the extension tube, insert it into the actuator using a twisting motion
Best results are obtained when material is at room temperature

Packing details:

Volume	Pack Qty	Carton Specs.	Carton Dimension (estimated)			Container Qty (cartons)
Volume	Pack Qty	Carton Specs.	L(cm)	W(cm)	H(cm)	20FT'	40HQ
250ml	24pcs/ctn	Kraft paper	33	22	17	2500	5600
400ml	12pcs/ctn	Kraft paper	27.5	20.5	20.5	2500	5600
650ml	12pcs/ctn	Kraft paper	27.5	20.5	29	1816	3294

Let's take a look at how to use Aerosol Carb Cleaner correctly:
1.Ensure the engine is cool: Before starting the cleaning process, make sure the engine has completely cooled down. This will prevent any injuries and allow the cleaner to work better.

2.Locate the carburetor intake: Depending on your car model and manufacturer's guide, find the intake of the carburetor. This is usually a small hole located beneath the engine cover.

3.Disconnect the intake pipe: Using a wrench or screwdriver, gently loosen and remove the intake pipe from the carburetor. Remember the position of each connection so that you can reattach them after cleaning.

4.Apply the cleaner: Spray an appropriate amount of Carburetor Cleaner into the carburetor intake. Ensure even coverage of the entire internal surface and let the cleaner sit for a while to take effect.

5.Clean the carburetor: Gently scrub the internal surface of the carburetor with a brush or soft cloth to thoroughly remove dirt and carbon deposits. Be careful while handling and avoid damaging any parts.

6.Spray cleaner again: After cleaning, spray another round of cleaner into the carburetor and let it sit for some time. This helps to remove any remaining residues thoroughly.

7.Reinstall the intake pipe: Ensure proper reconnection of the intake pipe and tighten screws or nuts securely.

Finally, start the engine and let it run for a while to ensure that all traces of cleaner have been flushed out. You will immediately feel a smoother engine performance and increased responsiveness.

I hope these simple steps help you use carburetor cleaner correctly and maintain your car engine in good condition. If you have any questions or need further advice, please feel free to leave a message in the comments section or contact me directly（ contact@lidigz.cn ）. Thank you!

Author:

Ms. NANA ZENG

E-mail:

contact@lidigz.cn

Phone/WhatsApp:

+8615018363416